Detector

DAP3200 Heat Detector for Fixed Temperature

Technological parameters

· Operating voltage: 19V～24V

· Temperature-sensing style: fixed temp.

· Operating current: ≤0.5mA

· Protect area: 40 m2

· Alarm current: ≤3mA

· Ambient temperature : 0℃～80℃

· Ambient humidity:≤95% no-condensation

· Alarm temperature:Ⅰdegree 54℃～62℃

Ⅱdegree 62℃～70℃

Ⅲdegree 70℃～78℃

· Overall size: Φ104mm

· Installation style: bi-bus, no-polarity

DAP3200 heat detector for fixed temperature utilizes the sensibility of semiconductor’s thermal element for temperature to check up ambient temperature, meanwhile it converts the detected temperature into analogue signal to fire alarm controller. When the temperature achieves the alarm value, the fire alarm controller sends the alarm signal.

Characteristics

Communication circuit and detection circuit merge into an organic whole, and it needn’t coding base.

Set three degree sensitivity according to ambient environment.

High stability, low misstatement rate and non-weather influence.

Application spot

Relative humidity often excesses 95%, those places where no-smoke fire possibly happens and exist plenty of dust

The places where there are smog and vapor in normal situation

Kitchen, boiler room, generator room, drying room

Garage, smoking room

The hall and public places where it isn’t convenient to install smoke detector